Product ID:PRESTONE HEAVY DUTY BRAKE FLUID, AS400
MSDS Date:12/19/1988
FSC:9150
NIIN:00N020226
MSDS Number: BLVMK

FIRST BRANDS CORPORATION

83 WOOSTER HEIGHTS ROAD
DANBURY, CT 06813-1911
US

Emergency Phone: 203-731-2300;800-424-9300(CHEMTREC)

Info Phone: 203-731-2300

Preparer: P C ZAZZARO

Cage: DO273

PRESTONE PRODUCTS CORP

DANBURY, CT 06810-5109 US

Telephone: 203-731-3686/830-7865

Cage: 0CXZ7

DIETHYLENE GLYCOL

CAS: 111-46-6

RTECS: ID5950000

POLYETHYLENE GLYCOL

CAS: 25322-68-3

RTECS: TQ3500000

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

POLYALKYLENE GLYCOL ETHERS

CORROSION INHIBITOR

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST: MAY CAUSE NAUSEA. SKIN ABSORP:
NO EVIDENCE OF ADVERSE EFTS FROM AVAIL INFORMATION. INHAL: NO
EVIDENCE OF ADVERSE EFTS FROM AVAIL INFORMATION. SKIN: NO EVIDENCE
OF ADVERSE EFTS FROM AVAIL INFOR MATION. EYE: MAY CAUSE IRRIT, SEEN
AS EXCESS REDNESS & POSSIBLE SWELLING OF THE CONJUNCTIVA. EFTS (SEE
EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: OF RPTD OVEREXP: NO EVIDENCE OF
ADVERSE EFTS FROM AVAIL INFORMATION. OTHER EFTS OF OVEREXP: OVEREXP
TO VAPS GENERATED AT HIGH TEMPS MAY RESULT IN EYE & RESP TRACT
IRRIT & IN INHAL OF HARMFUL AMTS OF MATL. THIS PROD MAY CONTAIN A
SECONDARY AMINE WHICH MAY REACT W/NITRITES TO FORM NITROSAMINES.
(SUPP DATA)
Medical Cond Aggravated by Exposure:A KNOWLEDGE OF THE AVAILABLE
TOXICOLOGY INFORMATION AND OF THE PHYSICAL AND CHEMICAL PROPERTIES
OF THE MATERIAL SUGGEST THAT OVEREXP IS UNLIKELY TO AGGRAVATE
EXISTING MEDICAL CONDITIONS.

First Aid:INGEST: IF A SIGNIFICANT QTY HAS BEEN SWALLOWED, GIVE AT
LEAST 2 GLASSES OF MILK OR WATER & INDUCE VOMIT, UNLESS PATIENT IS
UNCONSCIOUS. CALL MD. SKIN: WASH W/SOAP & WATER. INHAL: REMOVE TO
FRESH AIR. EYES: FLUSH THORO W/WATER FOR AT LEAST15 MIN. CALL MD
IF DISCOMFORT PERSISTS. NOTE TO MD: THERE IS NO SPECIFIC ANTIDOTE.
TREATMENT OF OVEREXP SHOULD BE DIRECTED AT CONTROL OF SYMP &
CLINICAL CNDTN.

Flash Point:SEE SUPP DATA
Extinguishing Media:WATER FOG, FOAM, ALCOHOL FOAM, CO2 AND DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . KEEP AWAY FROM OXIDIZING AGENTS &
TEMPERATURES IN EXCESS OF 300C.
Unusual Fire/Explosion Hazard:NONE EXPECTED.

Spill Release Procedures:WEAR SUITABLE PERSONAL PROTECTIVE EQUIPMENT.
COLLECT FOR DISPOSAL. LARGER SPILLS MAY BE ABSORBED ON VERMICULITE
OR OTHER SIMILAR MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:EYE IRRITANT: AVOID EYE CONTACT. DO
NOT CUT OR WELD ON OR NEAR EMPTY DRUMS OR PAILS. DO NOT REUSE EMPTY
DRUMS OR PAILS UNLESS PROPERLY CLEANED.
Other Precautions:OBSERVE ALL REQUIREMENTS OF PLANT, COMPANY OR
GOVERNMENT REGULATIONS. KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:NONE REQUIRED IN NORMAL USE. IF PERSONNEL
EXPOSURE EXCEEDS EXPOSURE LIMITS, SELECT IN ACCORDANCE WITH 29 CFR
1910.134. NIOSH/ MSHA APPROVED RESPIRATOR EQUIPPED WITH ORGANIC
VAPOR CARTRIDGE AND DUST/ M IST PRE-FILTER RECOMMENDED.
Ventilation:GENERAL (MECH/NATL) VENT IS EXPECTED TO BE ADEQ FOR NORMAL
USE. IF PERS EXPOS EXCEEDS EXPOS LIMITS, APPLY (SUPP DATA)
Protective Gloves:BUTYL RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH, SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FL PT & FL PT METH: 270F TOC; 218F PMCC. EFTS OF OVEREXP: SOME
NITROSAMINES HAVE BEEN SHOWN TO BE CARCINOGENIC IN LABORATORY
ANIMALS. VENT: LOCAL EXHAUST VENTILATION AT POINTS OF VAPOR AND
MIST RELEAS E.

HCC:V6
Boiling Pt:B.P. Text:>450F,>232C
Melt/Freeze Pt:M.P/F.P Text:<-40F,<-40C
Vapor Pres:<0.1
Vapor Density:>1
Evaporation Rate & Reference:<0.1 (BUTYL ACETATE = 1)
Solubility in Water:100% (WT)
Appearance and Odor:CLEAN, AMBER LIQUID WITH SLIGHT AMINE ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 300C.
Hazardous Decomposition Products:BURNING CAN PRODUCE SMALL AMOUNTS OF
NOX.

Waste Disposal Methods:INCINERATION, TREATMENT, OR LANDFILLING SHOULD
BE CARRIED OUT IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.